to regulate the flow of the working medium in industrial, technological pipelines and can be equipped with electric drives for remote control and operation in automatic control systems.
DN15-150, 1.6, 2.5, 4.0 MPa
Connection to the pipeline is flanged, welded, coupling, fitting, Russian production.
Regulating ball valves are designed for
The design of the regulating valve – unlike the shut-off valve – allows you to leave its shut-off body (ball plug) in an intermediate position, without damaging the seats and maintaining class A tightness in the closed position. The dependence of the throughput on the angle of rotation of the ball plug with a constant pressure drop on the ball valve determines the throughput (flow) characteristic of the regulating ball valve, which depends on the profile of the hole in the ball plug.
FB39 regulating ball valves are available in two types: with linear and equal-percent throughput characteristics. With a linear characteristic, the increment of throughput is proportional to the angle of rotation of the ball plug. With an equal percentage characteristic, the increment of throughput is proportional to the current
| Characteristic | Value |
| Working medium | liquid and gaseous media |
| Working medium temperature | |
| For stainless and low temperature carbon steel | – 60°С…+160 °С |
| For carbon steel | – 40°С…+160 °С |
| Throughput characteristic | equal percent or linear |
| Climatic version according to GOST 15150-69 | U1 (-40°C…+40°C) or UHL1 (-60°C…+50°C) |
| Handle turning force, N | 150 max |
| Total service life, cycles | 8000 |
| The full service life | 10 |
The regulating ball valve consists of a housing 7, a branch pipe 9 and a flange 14, interconnected by studs 15 and nuts 18. The plug 10 is installed inside the housing and is clamped by the seats 12. To ensure equal percent or linear control characteristics, the plug has versions that differ in the shape of the hole. The spindle 16 with a washer 3 is installed in the housing 7 and sealed with a package of fluoroplastic 4,5 and rubber 17 rings. The sealing bag is locked from above by a sleeve 1 and a locking ring 20. A disk stop 13 with a limb 8 is installed on top of the spindle. Divisions from 0 to 9 are plotted on the limb, which correspond to certain kv flow coefficients given in the table for each DN. A mark is milled on the flange of the housing 7. The plug is rotated by the handle 11. When the label on the housing flange is combined with the selected division on the limb, the plug occupies a position that provides the specified flow rate. Fixing in this position is performed by tightening the nut 2 on the stud installed in the housing 7. The spatial position of the crane on the pipeline is arbitrary. Cranes installed in automatic control systems are equipped with an electric drive, and have a three-part design of the “Classic” type with the preservation of regulatory characteristics. Also, control valves can be produced in coupling, fitting and welded versions of connection to the pipeline and equipped with electric drives for remote control and operation in automatic control systems. The overall and connecting dimensions of such cranes can be found in the relevant sections of the catalog.
PRODUCT CATALOGS IN .pdf FORMAT:
| № | Name | Materials used in various valve versions | |||||
|---|---|---|---|---|---|---|---|
| - | -00, -10 | -01,-11 | -02, -12 | -03, -13 | -04, -14 | ||
| 1 | Bushing | Steel 14X17N2T | |||||
| 2 | Nut bolt | Steel 20 | |||||
| 3 | Puck | PTFE | |||||
| 4 | Ring | ||||||
| 5 | Ring | ||||||
| 6 | Ring | Paronite PON | |||||
| 7 | Body | Steel 12X18N10T | Steel 20 | cold-resistant steel | |||
| 8 | Limbo | ||||||
| 9 | Branch pipe | Steel 12X18N10T | Steel 20 | cold-resistant steel | |||
| 10 | Plug | ||||||
| 11 | Handle | Steel 20 | cold-resistant steel | ||||
| 12 | Saddle | PTFE | |||||
| 13 | Emphasis | Steel 20 | |||||
| 14 | Flange | Steel 12X18N10T | Steel 20 | cold-resistant steel | |||
| 15 | Stud bolt | Steel 45X14N14V2M | Steel 35 | ||||
| 16 | Spindle | Steel 14X17N2T | |||||
| 17 | Rubber ring | EP-503, H-183 | |||||
| 18 | Nut bolt | Steel 12X18N10T, Steel 12X18N9 | Steel 20 | cold-resistant steel | |||
| 19 | Nut bolt | ||||||
| 20 | Locking ring | Steel 60X2A | |||||
| Designation | PN | DN | 0 | D | D1 | D2 | n | d | L | L1 | H | 3D model | Weight . kg |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| ФБ39.X10.015.900 R | 16;25;40 | 15 | 15 | 95 | 65 | 47 | 4 | 14 | 130;108 | 133 | 92 | 2,7;2,4 | |
| ФБ39.X10.020.900 R | 20 | 20 | 105 | 75 | 58 | 4 | 14 | 150;117 | 133 | 100 | download | 3,7;3,4 | |
| ФБ39.X10.025.900 R | 25 | 25 | 115 | 85 | 68 | 4 | 14 | 160;127 | 133 | 102 | 4,6;3,9 | ||
| ФБ39.X10.032.900 R | 32 | 32 | 135 | 100 | 78 | 4 | 18 | 180;140 | 245 | 130 | 5,4;7,1 | ||
| ФБ39.X10.040.900 R | 40 | 40 | 145 | 110 | 88 | 4 | 18 | 200;170 | 245 | 132 | 9;8,2 | ||
| ФБ39.X10.050.900 R | 50 | 50 | 160 | 125 | 102 | 4 | 18 | 230;180 | 245 | 147 | 11,7;11,5 | ||
| ФБ39.010.065.900 R | 65 | 65 | 180 | 145 | 122 | 4 | 18 | 290;190 | 245 | 150 | 15,5;15 | ||
| ФБ39.010.080.900 R | 16 | 80 | 80 | 195 | 160 | 133 | 4 | 18 | 310;210 | 320 | 195 | 21,5;21 | |
| FB39.010.100.900R | 100 | 100 | 215 | 180 | 158 | 8 | 18 | 350;230 | 320 | 210 | 31;28,5 | ||
| FB39.010.125.000R | 125 | 125 | 245 | 210 | 184 | 8 | 18 | 400 | 320 | 210 | download | 43 | |
| FB39.010.150.000R | 150 | 150 | 280 | 240 | 212 | 8 | 22 | 480 | 400 | 270 | 69 |
“X” for Ru16 – 0, Ru25 – 1, Ru40 – 2
Valves over DN100 have a 3-part design of the CLASSIC series. It is possible to manufacture regulating valves in design versions gray RETRO, POLO, CLASSIC, LONG
TABLE OF KV VALUES FOR THE CONTROL VALVE
(EQUAL PERCENT CHARACTERISTIC)
| Limb division | DU15 | DU20 | DU25 | DU32 | DU40 | DU50 | DU65 | DU80 | DU100 | DU125 | DU150 |
|---|---|---|---|---|---|---|---|---|---|---|---|
| 1 | 0,0 | 0,0 | 0,37 | 0,0 | 0,96 | 1,86 | 5,44 | 6,80 | 5,54 | 9,52 | 14,07 |
| 2 | 0,0 | 0,14 | 1,17 | 0,80 | 2,40 | 3,60 | 10,03 | 13,40 | 18,82 | 27,72 | 43,99 |
| 3 | 0,26 | 0,56 | 1,92 | 1,63 | 4,26 | 6,13 | 15,32 | 20,67 | 29,45 | 45,48 | 65,20 |
| 4 | 0,56 | 1,03 | 2,87 | 2,80 | 6,57 | 8,80 | 21,73 | 30,48 | 43,09 | 75,26 | 100,60 |
| 5 | 0,94 | 1,58 | 4,04 | 4,23 | 9,64 | 13,47 | 32,56 | 42,48 | 64,07 | 116,60 | 131,90 |
| 6 | 1,51 | 2,65 | 6,23 | 7,79 | 17,87 | 24,13 | 51,11 | 67,82 | 103,30 | 189,30 | 214,10 |
| 7 | 2,68 | 4,77 | 9,71 | 14,51 | 29,11 | 37,60 | 78,19 | 105,50 | 158,20 | 266,30 | 330,30 |
| 8 | 4,44 | 8,00 | 14,88 | 23,11 | 44,60 | 62,08 | 115,20 | 155,60 | 231,90 | 386,20 | 502,60 |
| 9 | 7,20 | 11,11 | 20,49 | 33,82 | 60,47 | 84,50 | 168,90 | 245,60 | 345,20 | 555,30 | 796,50 |
| Limb division | DU15 | DU20 | DU25 | DU32 | DU40 | DU50 | DU65 | DU80 | DU100 | DU125 | DU150 |
|---|---|---|---|---|---|---|---|---|---|---|---|
| 1 | 0,0 | 0,0 | 0,64 | 0,0 | 1,02 | 4,80 | 7,51 | 8,23 | 17,00 | 37,74 | 37,47 |
| 2 | 0,0 | 0,49 | 1,77 | 1,63 | 3,89 | 9,38 | 14,69 | 18,48 | 30,46 | 66,01 | 71,67 |
| 3 | 0,34 | 1,11 | 2,92 | 3,70 | 7,45 | 14,92 | 23,02 | 30,28 | 47,49 | 96,03 | 114,70 |
| 4 | 0,83 | 2,10 | 4,28 | 6,20 | 11,74 | 21,48 | 33,84 | 45,61 | 67,16 | 134,20 | 163,0 |
| 5 | 1,46 | 3,38 | 6,07 | 9,97 | 17,52 | 29,63 | 47,37 | 64,90 | 98,38 | 186,50 | 227,60 |
| 6 | 2,24 | 4,82 | 8,16 | 14,22 | 25,05 | 44,52 | 64,99 | 88,16 | 138,60 | 250,20 | 311,60 |
| 7 | 3,16 | 6,60 | 10,65 | 20,15 | 34,29 | 55,64 | 86,77 | 120,80 | 190,70 | 340,40 | 422,50 |
| 8 | 4,23 | 8,96 | 15,54 | 25,66 | 46,30 | 77,68 | 122,30 | 166,60 | 242,50 | 451,70 | 582,40 |
| 9 | 5,60 | 11,71 | 20,25 | 36,87 | 63,93 | 103,98 | 171,40 | 260,00 | 353,20 | 616,90 | 850,70 |
The regulating ball valve is relevant when accurate calibration of the working medium flow is required. It can be installed on pipelines in which gas, steam, chemical reagents, liquid of any composition, water and other substances are transported. The regulating ball valve is integrated by means of a welded, fitting or flange connection, depending on the length of the main line.
The cranes presented in the catalog are characterized by increased reliability and accuracy. The ball plug is designed to regulate the equal percent flow based on the design load. All products are made of stainless alloy steel and can be used in operating conditions at very high loads.
Ball valves of own, Russian production conforming to international quality standards ISO 9001:2000, API Spec Q1 and ISO/TS29001. For all products we provide a warranty period of 24 months from the date of commissioning, or 36 months from the date of manufacture
The price of a ball valve control varies depending on many factors, including the design of pressure, diameter and material. Additionally, the individual wishes of the customer are taken into account.
You can buy a ball valve at an affordable price in JSC RC “Fobos” by making an application by phone 8 (800) 700-62-60 (Moscow and all Russia) or using the services of regional managers, as well as by e-mail 14@fobosarm.ru
Delivery of cranes is carried out by the services of transport companies – Business lines, PEC. Also, transportation is carried out by rail Zheldorexpedition and other types of delivery with payment for transport services and cargo insurance services by the buyer.